Electrolux E23CS78HPS Owners Guide - Page 22

22 Automatic Ice & Water Dispenser USING THE DISPENSER CONTROL PANEL Cube Button & Indicator Light Press button to get cubed ice. Light displays blue. Press glass against ice dispensing paddle, holding high up to catch all ice. Crush Button & Indicator Light Press button to get crushed ice. Light displays blue. Press glass against ice dispensing paddle, holding high up to catch all ice. Light Button & Indicator Light Filter Status Button & Indicator Light Lock Button & Indicator Light Press button to turn on dispenser light. Light displays blue. Press button again to turn off dispenser light. Dispenser light also turns on automatically when ice and/or water is dispensed. Light displays in one of three possible colors each time the dispenser is used to show status of water filter: Green Water filter does not need changing. Amber Water filter is about 80 percent used. Please order a new one. Red Water filter is 100 percent used. Please change as soon as possible. After replacing the water filter, reset the filter status by pressing and holding Filter Status button for 10-15 seconds. The dispenser can be locked to prevent unwanted use. To lock, press and hold button for 3-5 seconds. Light displays blue. To unlock, press and hold button for 3-5 seconds until light goes out. Express Freeze Button & Indicator Light Press and hold button for 3-5 seconds to activate faster rate for freezing food (preserving freshness). Light displays blue. Press and hold button for 3-5 seconds again to deactivate. Express Ice Button & Indicator Light Press and hold button for 3-5 seconds to increase ice production for special occasions, such as parties. Light displays blue. Press and hold button for 3-5 seconds again to deactivate.