Electrolux E23CS78HPS Owners Guide - Page 14

14 Controls & Settings SYSTEM-MONITORING ALARMS Indicator Lights Alarm Reset Button The electronic control system continuously monitors your refrigerator/freezer for temperature consistency, doors left ajar, and power failures. Variances from normal operating conditions are communicated by audible tones and a set of four status indicator lights. NOTE Each time you make settings on the control panel, a single audible tone acknowledges your input. Responding to Alarms (Audible Tones & Indicator Lights) Your refrigerator's control system can convey the following information through audible tones and the alarm indicator lights. Alarm Indicator Audible Name Light Tones Condition How To Respond On (light is off) Alarm system is not active while Freezer and Fresh Food compartments are cooling toward the current temperature settings. If Freezer and Fresh Food compartments do not match your temperature settings in three hours, expect the control system to signal other conditions. If cooling does not stabilize toward your current settings, call 1-877-435-3267 for assistance. Steady Green Alarm system is active. No response required. Door Ajar Flashing Green 9 Freezer or Fresh Food door has been open for over five minutes. Close door to disable and reset alarm. High Temp Flashing Amber 9 Freezer or Fresh Food Press Alarm Reset button to turn off compartment has been too alarm. If temperatures do not improve, warm (45° F or higher) for call 1-877-435-3267 for assistance. over an hour. Power Flashing Failure Amber A power outage was detected. Press Alarm Reset button to turn off alarm and again to reset. Check if the power failure lasted long enough to affect stored food temperatures.