Electrolux E23CS78HPS Owners Guide - Page 15
Using The Alarm Reset Button, Checking the Air Filter Status
UPC - 012505695537
View all Electrolux E23CS78HPS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Controls & Settings 15 Using The Alarm Reset Button You can disable or activate the alarm system by pressing and holding the Alarm Reset button for three seconds. Use it, for example, to turn off audible tones and/ or flashing indicator lights. ! CAUTION The alarm system does not automatically reset if you disconnect and reconnect your refrigerator's power cord. It can only be reactivated by pressing the Alarm Reset button. Once you disable the alarm system, you must again press and hold the Alarm Reset button for three more seconds to reset (activate) the alarm system. The On indicator light remains off while the Freezer and Fresh Food compartments cool toward the current temperature settings. When temperature settings are reached, the On light displays green to indicate an active alarm system. Checking the Air Filter Status Your refrigerator's fresh food air filter needs to be replaced from time to time. You can monitor the need for replacement by pressing and holding the Air Filter On/Off button for three seconds. To check the air filter status: 1 Press the Air Filter On/Off button. This activates a test cycle, and one of the three filter status lights displays, indicating one of the following: Air Filter On/Off Button Indicator Lights Filter OK Air filter does not need changing. Order Filter Air filter is about 80 percent used. Please order new one. Change Filter Air filter is 100 percent used. Please change now. 2 Press the Air Filter On/Off button to turn off the status light.