Electrolux E36DF76TPS Complete Owners Guide English - Page 10
Assembling the G5 burners, Installing Burner Grates
View all Electrolux E36DF76TPS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
10 Before Setting Surface Controls Assembling the G5 burners IMPORTANT! For proper ignition: Burner Ring Alignment Tab Must Align with Burner Base Alignment Tab Slot. NOTE: When the burner ring is properly seated, it will click into place. When the burner cap is properly set in place it should not move out of the recessed area of the burner head. Burner Cap Burner Ring Alignment Tab Burner Alignment Tab Slot Burner Ring Burner Base Simmer Head Figure 3: Make sure burner cap and ring are secure before attempting to light the burner. Installing Burner Grates Do not use surface burners without burner caps and grates properly installed. Missing pieces or improper installation may lead to spills, burns, or damage to your range and cookware. Make sure the burner grates are properly placed on the cooktop before using the surface burners. The grates are designed to rest inside the recess on the cooktop.To install burner grates, place grates flat-side down and align into the cooktop recess. Grates should rest flush against each other and against the sides of the recess (See Figure 4). Figure 4: How to properly place burner grates