Electrolux E36DF76TPS Complete Owners Guide English - Page 9
Before Setting Surface Controls, Gas Surface Burners, Burner Caps and Burner Grates Assembly
View all Electrolux E36DF76TPS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Before Setting Surface Controls 9 BEFORE SETTING SURFACE CONTROLS Gas Surface Burners Your appliance is equipped with gas surface burners that have different BTU ratings. The ability to heat food quicker and in larger volumes increases as the burner size increases (Figure 1). Regardless of size or location, always select cookware that is suitable for the amount and type of food being prepared. Select a burner and flame size appropriate to the pan. Never allow flames to extend beyond the outer edge of the pan. Setting Regular Burner Caps Burner Cap Burner Head Burner Cap Lip Figure 1: Burner controls and location Burner Caps and Burner Grates Assembly Correct Burner Cap Placement Incorrect Burner Cap Placement To prevent flare-ups use the cooktop with all burner caps properly installed. Placement of burner caps IMPORTANT! Your new range comes with two styles of burners. • Follow the instructions carefully when placing caps on burners as shown in Figure 2. • Place a burner cap on each burner head, matching the cap size to the head size. The cap for each burner has an inner locating ring which centers the cap correctly on the burner head. Be sure that all the burner caps and burner heads are correctly placed before using your appliance. • Make sure each burner cap is properly aligned and level. • Turn the burner on to determine if it will light. If the burner does not light, contact the installer. Do not service the sealed burner yourself. ATTENTION: Do not slide the burner caps on the cooktop, doing so can damage the surface. Figure 2: Placing cap properly on burner head