Epson 2080 Product Information Guide - Page 25

EPSON LQ-2080 9. To remove any slack in the ribbon, turn the ribbontightening knob in the direction of the arrow shown in step 8. Then slide the print head from side to side to make sure it moves smoothly. 10. Replace the printer cover. Clearing Paper Jams To clear a paper jam, follow these steps: 1. Press the Operate button to turn off the printer. 2. If a single-sheet of paper is stuck on the paper guide, gently remove it. 3. Remove the printer cover. If you are loading continuous paper from the rear slot, remove the paper guide. 4. If continuous paper is jammed in the printer, tear off the fresh supply at the perforation nearest the paper entry slot. 5. Turn the knob on the right side of the printer away from you to eject the paper in the printer. Remove any remaining pieces of paper. Caution: Use the knob on the right side of the printer only to clear paper jams when the printer is off. Otherwise, you may damage the printer or lose the top-of-form or tear-off position. 6. Replace the printer cover, and the paper guide if necessary. Then close the paper guide cover. 7. Press the Operate button to turn on the printer. Make sure the Paper Out and Pause lights are off. Your Printer's Default Settings The printer's default settings control many printer functions. While you can often set these functions through your software or printer driver, you may sometimes need to change a default setting from the printer's control panel using the defaultsetting mode. The following table lists the default settings (highlighted in bold text) and the options you can select in the default-setting mode. To change the default settings, see the next section, "Changing Default Settings." Settings Page length for front tractor* Options Length in inches: 3, 3.5, 4, 5.5, 6, 7, 8, 8.5, 11, 70/6, 12, 14, 17 Page length for rear tractor* Length in inches: 3, 3.5, 4, 5.5, 6, 7, 8, 8.5, 11, 70/6, 12, 14, 17 Skip over perforation On, Off Auto tear off On, Off Auto line feed On, Off Print direction Auto, Bi-D, Uni-D I/F mode Auto, Parallel, Optional Auto I/F wait time 10 seconds, 30 seconds Software ESC/P2, IBM 2391 Plus Character table International character set for Italic table Standard model: Italic, PC 437, PC 850, PC 860, PC 863, PC 865, PC 861, BRASCII, Abicomp, Roman 8, ISO Latin 1, PC 858, ISO 8859-15 All other models: Italic, PC 437, PC 850, PC 437 Greek, PC 853, PC 855, PC 852, PC 857, PC 864, PC 866, PC 869, MAZOWIA, Code MJK, ISO 8859-7, ISO Latin 1T, Bulgaria, PC 774, Estonia, ISO 8859-2, PC 866 LAT, PC 866 UKR, PC APTEC, PC 708, PC 720, PC AR864, PC 860, PC 865, PC 861, PC 863, BRASCII, Abicomp, Roman 8, ISO Latin 1, PC 858, ISO 8859-15 Italic U.S.A, Italic France, Italic Germany, Italic U.K., Italic Denmark1, Italic Sweden, Italic Italy, Italic Spain1 0 slash O, Ø High-speed draft On, Off Input buffer Buzzer On, Off On, Off Auto CR (IBM 2391 Plus)** On, Off A.G.M. (IBM 2391 Plus) ** On, Off Font OCR-B, Orator, Orator-S, Script C, Roman T, Sans Serif H Roll paper On, Off * The options available vary depending on the country. ** These settings take effect only when IBM 2391 Plus emulation is selected. 2/99 EPSON LQ-2080 - 25