Epson 2080 Product Information Guide - Page 7

EPSON LQ-2080 LF/FF button t Feeds paper line by line. t Ejects a single sheet or advances continuous paper to the next top-of-form position when held down. Load/Eject button t Loads a single sheet of paper. t Ejects a single sheet of paper if a sheet is loaded. t Loads continuous paper from the standby position. t Feeds continuous paper backward to the standby position. Micro Adjust When the Pause button is held down for three seconds, the printer enters the micro adjust mode. Using the micro adjust feature, you can adjust the top-of-form or tear-off position with the D and U buttons. Operate button Turns the printer on and off. The printer is off when the top of this button is even with the button protectors. Error Indicators You can identify many common printer problems using the lights on the control panel. If your printer stops working and one or more control panel lights are on or flashing or the printer beeps, use the following table to diagnose and fix the problem. State of panel lights n Pause Beep pattern - Problem Solution The printer is paused. Press the Pause button to resume printing. Paper from another paper source is currently in the paper path. Move the paper release lever back to the appropriate position and press the Load/Eject button to feed the paper out of the paper path. Then set the lever to the position you want to use. Press the Pause button to turn off the Pause light, if necessary. State of panel lights n Paper Out n Pause Beep pattern ••• Problem Solution No paper is loaded in the selected paper source. Load paper in the printer. Then press the Pause button to turn off the Pause light, if necessary. ••• The paper is not loaded correctly. Remove your paper and reload it correctly. Then press the Pause button to turn off the Pause light, if necessary. ••• Paper is jammed in the printer. f Paper Out n Pause Clear the paper jam. ••• Continuous paper is not fed to the standby position. Tear off the printed document at the perforation; then press the Load/ Eject button. The printer feeds the paper to the standby position. Press the Pause button to turn off the Pause light. ••• A single sheet of paper is not fully ejected. Press the Load/Eject button to eject the sheet. Then press the Pause button to turn off the Pause light, if necessary. ••• Paper is jammed in the printer. Clear the paper jam. f Pause - The print head is overheated. Wait a few minutes; the printer resumes printing automatically once the print head cools. f Paper Out f Pause - An unknown printer error has occurred. f f Tear Off/Bin f f Font Turn off the printer and leave it off for several minutes; then turn on the printer again. If the error recurs, contact your dealer. n = on, f = flashing short series of beeps (three beeps long series of beeps (five beeps) Note: The printer beeps once if you press a control panel button when the corresponding function is not available. 2/99 EPSON LQ-2080 - 7