Epson 2080 Product Information Guide - Page 6

EPSON LQ-2080 Roll paper A B B Control Panel Buttons and Lights printable area A A The minimum top and bottom margins are 0.17 inch (4.2 mm). B The minimum left and right margins are 0.12 inch (3 mm). The maximum printable width is 8.0 inches (203 mm). Safety Approvals 120 V model: Safety standards UL 1950 CSA C22.2 No. 950 EMI FCC part 15 subpart B class B CSA C108.8 class B 230 V model: Safety standards EN 60950 (TÜV) EMI EN 55022 (CISPR pub. 22) class B AS/NZS 3548 class B Acoustic noise Approx. 50 dB (A) (ISO 7779 pattern) CE Marking 230 V model: Low Voltage Directive 73/23/EEC EMC Directive 89/336/EEC EN 60950 EN 55022 Class B EN 61000-3-2 EN 61000-3-3 EN 50082-1 IEC 801-2 IEC 801-3 IEC 801-4 Font button Selects the font. Font lights Indicate which font is selected. Condensed button Turns on the condensed mode. Condensed light Lights up when the condensed mode is on. Pause button Stops printing temporarily, and resumes printing when pressed again. Pause light t On when the printer is paused. t Flashes when the printer is in the micro adjust mode. Paper Out light t On when no paper is loaded in the selected paper source or paper is not loaded correctly. t Flashes when paper has not been fully ejected or a paper jam has occurred. Tear Off/Bin button t Advances continuous paper to the tear-off position. t Feeds continuous paper backward from the tear-off position to the top-of-form position. t Selects a cut-sheet feeder bin when the cut-sheet feeder is installed. t Enters the card mode to print on postcards and envelopes. Tear Off/Bin lights t f f when continuous paper is in the tear-off position. t o n when bin 1 of the optional cut-sheet feeder is selected. t n o when bin 2 of the optional cut-sheet feeder is selected. t n n when the printer is in the card mode. n = on, o = off, f = flashing 6 - EPSON LQ-2080 2/99