Epson BrightLink 1485Fi Users Guide - Page 261
Using Interactive Features with Two Projectors (DuoLink), Projector Keyword, Stop Sharing
View all Epson BrightLink 1485Fi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 261 highlights
The projectors start connecting. 4. Enter the Projector Keyword if necessary. When the connection is established, a connection status bar appears at the top of the distributing projector's screen. Each receiving projector displays a message indicating that it cannot share the image on the screen until the distributing projector selects an input source. 5. Repeat steps 3-4 to connect any remaining projectors. 6. Select the input source you want to display. The projected screen is shared with the receiving projectors on their LAN input source. 7. To end screen sharing from the distributing projector, select the Stop Sharing icon in the status bar at the top of the screen. Note: To end screen sharing from the receiving projectors, select the Stop Sharing icon on the toolbar. You can also restrict drawing from receiving projectors. Press the Home button on the remote control and select Screen Sharing. In the list of connected projectors, tap the projector you wish to restrict drawing from and disable the drawing setting. Parent topic: Sharing the Projected Screen Using Interactive Features with Two Projectors (DuoLink) You can use your projector's interactive features while projecting with two projectors installed side by side (BrightLink 1485Fi). If you're using a Mac, download and install the software from the website to get started. See the online DuoLink Setup Guide for additional information. Parent topic: Using the Interactive Features 261