Epson BrightLink 1485Fi Users Guide - Page 349

• Make sure the receiving projector supports the Screen Sharing function. • Make sure the Screen Sharing setting in the Network menu is set to On for all projectors. • Close any running Epson iProjection (Windows/Mac) software. • Make sure the image being projected is not protected by copyright. • Make sure Sharing is displayed on the status bar that appears in the upper center part of the screen. If it is not displayed, try reconnecting. Parent topic: Solving Network Problems Related references Network Settings - Network Menu Related tasks Starting a Shared Screen Session Solving Interactive Problems Check the solutions in these sections if you have problems using the interactive system. Note: If the "Error occurred in the Easy Interactive Function" message appears, contact Epson for help. Solutions When the Interactive Pens Do Not Work Solutions When the Interactive Pen Position Is Not Accurate Solutions When the Interactive Pens Are Slow or Difficult to Use Solutions When the Interactive Pens Cause Interference or Unwanted Effects Solutions When Finger Touch Interactivity Does Not Work Solutions When You Cannot Operate a Computer from the Projected Screen Solutions for Problems With Capturing, Printing, Saving, or Scanning Solutions for Problems with Whiteboard Mode Parent topic: Solving Problems Solutions When the Interactive Pens Do Not Work If the interactive pens do not work, try the following solutions: • The pens turn off automatically when not in use. Pick up the pen to turn it back on. • Make sure PC Interactivity is set to On on the projector's interactive toolbar. • Make sure you are not covering the black section near the tip of the pen. 349