Epson BrightLink 1485Fi Users Guide - Page 351
Solutions When the Interactive Pen Position Is Not Accurate
View all Epson BrightLink 1485Fi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 351 highlights
Related tasks Replacing the Hard Pen Tips Replacing the Soft Pen Tips Using the Pens Solutions When the Interactive Pen Position Is Not Accurate If the pen position is not the same as the mouse pointer, try the following solutions: • Make sure you have calibrated the system. Try manual calibration. • Reset the keystone, Quick Corner, and Arc Correction settings to their factory defaults. • If you mounted the projector using a wall mount and used keystone or other digital correction settings to adjust the image, return the settings to their factory defaults. Instead, use the adjustment dials on the wall mount to adjust the image shape; do not use any digital correction. Then focus the image and recalibrate. • If you use the E-Zoom + button on the remote control to enlarge the image, the pen position is not accurate. When you return the image to the original size, the position should be correct. • Select Reset All from the Initial/All Settings menu to restore the projector settings to their default values. • Set the output resolution of your computer to match the native resolution of the projector. If you connected your projector through a video scaler, make sure the video scaler output resolution setting matches your projector's native resolution. • Focus the image to sharpen it. • Make sure the cable cover is in place to keep cables from blocking the signal. • Try adjusting the pen operation area. • In PC Interactivity (in the Pen/Touch menu), turn off the Auto Adjust Pen Area setting and select the Manual Adj. Pen Area setting. Parent topic: Solving Interactive Problems Related concepts Pen Calibration Related references Pen and Touch Setup Settings - Pen/Touch Menu General Projector Specifications Installation Settings - Installation Menu 351