Epson C11C558001 User Manual - Page 32

sure the Tear Off/Bin, moving the paper.

Get Epson C11C558001 - LQ 590 B/W Dot-matrix Printer PDF manuals and user guides
UPC - 010343850040
View all Epson C11C558001 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 32 highlights

1. You may need to press the Tear Off/Bin button to advance the paper to the tear-off position. Make sure the Tear Off/Bin lights are flashing (the paper is at the current tear-off position). 2. Hold down the Pause button for about three seconds. The Pause light begins flashing and the printer enters Micro Adjust mode. 3. Open the paper guide cover, then press the LF/FF D button to feed paper backward, or press the Load/Eject U button to feed paper forward, until the paper perforation is aligned with the tear-off edge of the printer cover. Tear-off edge of the printer cover Paper perforation Note: The printer has a minimum and a maximum tear-off position. If you try to adjust the tear-off position beyond these limits, the printer beeps and stops moving the paper. 4. Tear off the printed pages. 5. Press the Pause button to turn off Micro Adjust mode. When you resume printing, the printer automatically feeds the paper back to the top-of-form position and begins printing. 32 Paper Handling

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
32
Paper Handling
1.
You may need to press
the
Tear Off/Bin
button to
advance the paper to the
tear-off position. Make
sure the Tear Off/Bin
lights are flashing (the
paper is at the current
tear-off position).
2.
Hold down the
Pause
button for about three
seconds. The Pause light
begins flashing and the
printer enters Micro
Adjust mode.
3.
Open the paper guide cover, then press the
LF/FF
D
button to feed
paper backward, or press the
Load/Eject
U
button to feed paper
forward, until the paper perforation is aligned with the tear-off edge
of the printer cover.
Note:
The printer has a minimum and a maximum tear-off position. If you try to
adjust the tear-off position beyond these limits, the printer beeps and stops
moving the paper.
4.
Tear off the printed pages.
5.
Press the
Pause
button to turn off Micro Adjust mode.
When you resume printing, the printer automatically feeds the paper
back to the top-of-form position and begins printing.
Tear-off edge of the printer cover
Paper perforation