Epson EMP 62 User's Guide - Page 25

Connecting a Composite Video Source, your projector and turn it on. See for instructions.

Get Epson EMP 62 - SVGA LCD Projector PDF manuals and user guides View all Epson EMP 62 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 25 highlights

Connecting a Composite Video Source If you're connecting a composite video device, use a commercially available RCA A/V cable. Before starting, make sure the projector and your DVD player or other video source are turned off. 1. Connect the yellow RCA plug on one end of the cable to the projector's yellow Video jack. 2. Connect the yellow plug on the other end of the cable to the video-out port on your video source. 3. To play sound through the projector, follow the instructions beginning on page 29. If you don't need to make any other connections, you can plug in your projector and turn it on. See page 32 for instructions. If more than one device is connected to the projector, select the correct source after projection starts by pressing the Source Search button on the projector or the Video button on the remote control. See page 34. Setting Up the Projector 25

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
Setting Up the Projector
25
Connecting a Composite Video Source
If you’re connecting a composite video device, use a commercially
available RCA A/V cable. Before starting, make sure the projector and
your DVD player or other video source are turned off.
1.
Connect the yellow RCA plug on one end of the cable to the
projector’s yellow
Video
jack.
2.
Connect the yellow plug on the other end of the cable to the
video-out port on your video source.
3.
To play sound through the projector, follow the instructions
beginning on page 29.
If you don’t need to make any other connections, you can plug in
your projector and turn it on. See page 32 for instructions.
If more than one device is connected to the projector, select the
correct source after projection starts by pressing the
Source Search
button on the projector or the
Video
button on the remote control.
See page 34.