Epson EMP 62 User's Guide - Page 61
lamp brightness when the projection is too bright, for the room.
View all Epson EMP 62 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
3. Press Enter. Then use the pointer button (or up and down arrow buttons) and the Enter button to set the following options: ■ Keystone Adjusts a distorted image from a trapezoid shape to rectangular. ■ Auto Keystone Automatically adjusts a distorted image from a trapezoid shape to rectangular when the projector's foot is extended or retracted. (Not available when you're projecting from the ceiling or using rear projection.) Select ON or OFF. ■ Operation Lock When turned on, this function disables all projector buttons except the P Power button. Changes to this setting take effect after you restart the projector. (After you turn off the projector, wait for the Ppower light to turn a steady orange before turning it on again.) ■ Pointer Shape Lets you select from three different pointer shapes. The Password Protect function must be cancelled first. See page 68. ■ Brightness Control Select Low lamp brightness when the projection is too bright for the room. The Low setting also reduces electricity consumption and fan noise. Select High to project the maximum brightness. (Also check the Brightness setting in the Image menu; see page 56.) ■ Volume Adjusts the volume for the projector's speaker. 4. When you're finished, press Esc or Menu. note To cancel the Operation Lock function from the projector, press the Enter button for about seven seconds. Fine-tuning the Projector 61