Epson Expression 11000XL Users Guide - Page 40
Setting and Placing Film, mm film strips
View all Epson Expression 11000XL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Home > Using the Transparency Unit Setting and Placing Film 35 mm film strips Mounted slides Medium format (120/220) 4 x 5 inch film Non-standard film sizes Note: Before scanning films, be sure to use a soft cloth to wipe the Transparency Unit glass and the scanner glass. When you scan transparent materials, choose the Home Mode or Professional Mode in Epson Scan. Open the Transparency Unit. Place the film in the appropriate holder. See the following sections for details on the different types of film. 35 mm film strips Mounted slides Medium format (120/220) 4 x 5 inch film Non-standard film sizes Place the film holder on the scanner glass, aligning it with the notch on the transparency guide. Make sure the glossy side of the film is facing down. Close the Transparency Unit. If the reflective document mat is installed on the Transparency Unit, remove it; for details, see Installing the Transparency Unit. Use your scanner software to scan the film. Note: Make sure the Transparency Unit is completely closed; otherwise, an error occurs and you cannot scan. Store the reflective document mat in the pocket on the top of the Transparency Unit when not in use. 35 mm film strips Place the 35 mm film holder on a flat surface, and then remove a strip cover.