Epson PowerLite 83c Product Information Guide - Page 10

PowerLite 822p/83c Projector Power Lamp light light Red Red Temp. light Description Red There is an internal error in the projector. Turn the projector off and unplug it. Contact Epson for help. Remote Control Buttons Turns projector on or off Selects another image source Using the Remote Control The remote control uses a line-of-sight infrared signal. It lets you access the projector's features from anywhere in the room- up to 20 feet away. (This distance may be shorter if the remote control batteries are low.) The projector may not respond to remote control commands in these conditions: ❏ You are too far away-not within 20 feet (6 meters)-or not within 30° to the left or right of the front or rear sensor or 15° above or below it ❏ The battery is weak or not installed correctly ❏ Ambient light is too bright ❏ A fluorescent light is shining into the infrared receiver ❏ A strong light source (such as direct sunlight) shines into the infrared receiver ❏ Other equipment emitting infrared energy is present (such as a radiant room heater) ❏ If a button on the remote control has been held for more than 30 seconds, the remote enters sleep mode. Press another button for normal operation. Displays or hides projector menus Selects a menu option or displays the next screen or menu; Auto function automatically adjusts computer images to the optimum settings Cycles through 8 color modes E-Zoom + zooms in on (enlarges) selected area and E-Zoom - reduces the zoomed image Cancels current function or displays previous menu or screen Changes the aspect ratio of images from 4:3 to 16:9 Freezes the current video or computer image Turns off audio and video; press again to resume 10 - PowerLite 822p/83c Projector 3/08