Epson R200 Printer Basics - Page 54
Removing and Installing Ink Cartridges, ink button again. - head removal
UPC - 010343849532
View all Epson R200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Removing and Installing Ink Cartridges Be sure you have a new ink cartridge before you begin. Once you start replacing a cartridge, you must complete all the steps in one session. 1. Make sure the printer is turned on (the green P power light should be on, but not flashing). Then open the printer cover. 2. Press and release the H ink button. If your ink light is off, go to step 4. If your ink light is on or flashing, the print head moves to the left, and the cartridge that need to be replaced stops under the _ ink out mark. The P power light begins to flash. Go to step 3. 3. Press the H ink button again. ■ If more than one cartridge is empty, the next cartridge moves under the _ ink out mark. ■ If all the empty cartridges have been identified, the print head moves to the ink cartridge replacement position. Note: You can also use the Status Monitor to find out which cartridge is out of ink. See "Checking the Ink Supply" on page 52 for more information. 4. Lift up the cartridge cover. 54 Maintaining Your Printer