Epson R200 Printer Basics - Page 62
Diagnosing Printer Problems
UPC - 010343849532
View all Epson R200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Diagnosing Printer Problems First, check the printer's lights (see below) or run a printer check (see page 63). Lights Green P power light flashes Red ) paper light is on Red ) paper light flashes Red H ink light flashes Red H ink light is on Explanation The printer is receiving a print job, replacing an ink cartridge, charging ink, or cleaning the print head. If the CD/DVD tray guide is open, close the CD/DVD tray guide, load paper, then press the ) paper button. Your paper ran out or more than one sheet loaded at a time. Load paper and press the ) paper button. When printing on CDs or DVDs, the CD/DVD tray is not inserted in the printer. Insert the CD/DVD tray into the printer and press the ) paper button (see "Inserting a CD or DVD" on page 33). Paper is jammed in the printer. Press the ) paper button to eject the jammed paper. If the light is still flashing, open the cover and remove all paper, including any jammed or torn pieces. Then reload paper and press the ) paper button to continue printing. When printing on CDs or DVDs, the CD/DVD tray is jammed in the printer. Pull out the CD/DVD tray and press the ) paper button. One or more cartridges are low on ink. Check the message that appears on your screen to determine which cartridge is low, or follow the instructions in "Checking the Ink Supply" on page 52. Make sure you have a replacement cartridge. One or more cartridges are out of ink or not installed. Make sure you have a replacement cartridge, then follow the steps in "Replacing an Ink Cartridge" on page 51. If you have just installed a new cartridge, it may be incompatible with the printer or incorrectly installed. Reinstall it or replace it with the correct cartridge as described on page 51. 62 Solving Problems