Epson R200 Printer Basics - Page 67
Print Quality Problems, You see banding light lines., Your printout is blurry or smeared. - print head
UPC - 010343849532
View all Epson R200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Print Quality Problems You see banding (light lines). ■ The print head nozzles may need cleaning; see page 49 for instructions. ■ Select a higher print quality and turn off High Speed mode. See page 23 (Windows) or page 25 (Macintosh). ■ Make sure the Type or Media Type setting matches the paper you loaded; see page 22 for guidelines. ■ Make sure the printable side of the paper is face up. It's usually brighter or whiter. ■ The ink cartridges may need replacing. To replace an ink cartridge, see page 51. ■ Run the Print Head Alignment utility; see page 57 for instructions. Your printout is blurry or smeared. ■ Make sure you load paper with the printable side face up. The printable side is usually the brighter or whiter side of the paper. ■ Make sure your paper isn't damp or curled, or loaded face down (the printable side should be face up). If it's damp or curled, reload a new stack of paper. ■ When printing on special paper, check the instructions in the paper package. You may need to use an included support sheet or load your paper one sheet at a time. ■ Use EPSON papers to ensure proper saturation and absorption of genuine EPSON inks. ■ Make sure your paper meets the specifications listed in the on-screen Reference Guide. ■ Run the Print Head Alignment utility. See page 57 for instructions. ■ Remove each sheet from the output tray after printing, especially when you're printing on transparencies. Problems and Solutions 67