Epson TM-U950P Operation Manual - Page 60

MICR use Use the following procedure to read MICR characters. User Operation Printer Operation Transmits FS a 0 1 H. Mechanically switches to MICR mode and waits for a personal check to be loaded. The slip LED blinks. (Transmits DLE ENQ 3.) (when the check waiting state is canceled) 2 Inserts a check. Detects the check, lights the SLIP light, and reads MICR characters. After reading, transmits the reading results. 3 Transmits FS a 0 H. (Re-reads the check and transmits the reading result.) 4 Transmits FS a 1. Loads the check paper to the print starting position. 5 Transmits endorsement printing data. Prints data and feeds paper. 6 Transmits FF. After printing, ejects paper. The SLIP light blinks until the check is removed. 7 Removes the check paper. The SLIP light blinks. Notes on MICR use t Personal checks are fed in the forward direction only. t Paper rolls must be loaded onto both the receipt and journal sides correctly before selecting MICR function. Otherwise, check paper is not fed properly. t The check waiting state is canceled using DLE ENQ 3. t After a personal check is ejected, the SLIP light comes on and the printer does not proceed to the next operation until the check is removed. 4-4 Reference Information