Epson TM-U950P Operation Manual - Page 65

Total 0.24 mm (.0094") or less thickness: (original to original + 3 copies) 0.30 mm (.0118") or less (original + 4 copies) Note: When using multi-ply paper that consists of an original and three copies, be sure to print with a 9 × 9 font. If a 7 × 9 font is used, some characters on some of the copies may not be readable. Notes on slip paper t The slip paper must be flat, without curls or wrinkles, especially at the top edges. Otherwise, the paper may rub against the ribbon and become dirty. t There must be no glue on the bottom edge of slip paper. It is desirable for the glue to be on the top edge. Choose slip paper carefully when the glue is on the right or left edge, since paper feeding and insertion are affected by gluing conditions (e.g., glue quality, method, and length) and glue location. (See the illustration below.) Be especially careful when slip paper is wide and has the glue on the right or left edge, since it may not feed in a straight line. . OK to use Do not use Use carefully Use carefully Paper feed direction Glued area t Since the slip insertion detector uses a photo detector, paper that has holes at the detector position, or is translucent, must not be used. (See the illustration below.) Reference Information 4-9