Epson V11H181020SC User's Guide - Page 34
Viewing and Adjusting Video Information, following items
UPC - 010343856998
View all Epson V11H181020SC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
You can adjust the following items for various viewing conditions and individual videos: ■ Brightness ■ Contrast ■ Color Saturation ■ Tint (only works on NTSC signals) ■ Sharpness ■ Keystone: Corrects the distorted image shape caused by tilting MovieMate up or down, as shown. 3. Press or to increase or decrease the setting. The settings are saved, even after you turn MovieMate off. Viewing and Adjusting Video Information You can use the Visual Info. button on the remote control to view the number of hours the lamp has been used, and to reset the timer after you install a new lamp. You can also adjust the video signal setting and select high altitude mode if necessary. 1. Press the button on the remote control. You see the following on the screen: Note: If the lamp has been used less than 11 hours, 0H is displayed. 2. To adjust the video signal, reset the lamp hours, or select high altitude mode, continue pressing the button until you see the item you want to set. You can adjust the following items: ■ Video Signal: If you are using external video equipment and you see interference or other problems, select the appropriate signal for your equipment. For most purposes, leave this setting on Auto. ■ High Altitude Mode: If you are using MovieMate at an altitude above 4,900 feet, select ON. ■ Lamp-Hours Reset: After you replace the lamp, select Yes to reset the lamp timer. 3. Press or to change the setting. 34 Doing More with MovieMate