Epson V11H181020SC User's Guide - Page 49

■ If you're using the Keystone adjustment, be aware that it lessens image quality. You may wish to decrease the projection angle to reduce the amount of keystone correction needed, or use the lens shift dials to position the image. See page 16. ■ If you're using external video equipment, check the solutions on page 51. The picture looks too light or too dark. ■ Press the button on the remote control to select the best setting for your viewing environment. See page 21. ■ Adjust the Brightness and Contrast settings. See page 33. ■ The screensaver feature fades out the picture if a still image is projected for more than 5 minutes. See page 33. ■ If the picture looks darker than it used to, you may need to replace the lamp. See page 41. The colors on the screen don't look right. ■ Press the button on the remote control to select the best setting for your viewing environment. ■ Adjust the Color Saturation or Tint settings. See page 33. ■ If you're using external video equipment, check the solutions on page 51. The picture is wider at the top or bottom. ■ You've tilted MovieMate to raise or lower the image, causing it to become "keystoned." Use the Keystone setting to correct the problem. See page 33. ■ Better yet, place MovieMate at a height approximately between the top and bottom of the screen, keeping it level, and then use the vertical lens shift dial to position the image (see page 16). You won't have to correct for keystone distortion this way, and you'll get a better-looking image. The picture is taller on the left or right side. MovieMate is set at an angle to the screen. Face it squarely toward the screen, and then use the horizontal lens shift dial to center the image. See page 16. Problem Solving 49