Epson V11H181020SC User's Guide - Page 42
Loosen the two silver screws holding the lamp in place. You can't remove these screws.
UPC - 010343856998
View all Epson V11H181020SC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
3. Insert a small screwdriver into the lamp cover release slot, pushing it in gently to release the lamp cover. . 4. Loosen the two silver screws holding the lamp in place. (You can't remove these screws.) 5. Grasp the lamp as shown and pull it straight out. Note: The lamp in this product contains mercury. Please consult your state and local regulations regarding disposal or recycling. Do not put in the trash. 6. Gently insert the new lamp and tighten its screws. Caution: Don't touch the glass portion of the lamp with your bare hands; the invisible residue left by the oil on your hands may shorten the lamp life. Use a cloth or gloves to handle the new lamp assembly. 42 Caring for MovieMate
42
Caring for MovieMate
3.
Insert a small screwdriver into the lamp cover release slot, pushing it in gently to release
the lamp cover.
.
4.
Loosen the two silver screws holding the lamp in place. (You can’t remove these screws.)
5.
Grasp the lamp as shown and pull it straight out.
Note:
The lamp in this product contains mercury. Please consult your state and local
regulations regarding disposal or recycling. Do not put in the trash.
6.
Gently insert the new lamp and tighten its screws.
Caution:
Don’t touch the glass portion of the lamp with your bare hands; the invisible residue
left by the oil on your hands may shorten the lamp life. Use a cloth or gloves to handle the new
lamp assembly.