Fisher and Paykel WA3927G1 User Guide - Page 16
Caution
View all Fisher and Paykel WA3927G1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
US 14 Installation instructions CA Special requirements for alcove or closet installation The minimum ventilation clearance between the washer and adjacent walls or other surfaces is: 1" (25 mm) minimum either side and front 3" (75 mm) minimum rear Consideration must be given to providing adequate clearance for installation and servicing. 60 Sq. In (388 Sq. cm) The minimum vertical space required from floor to overhead shelves, cabinets, ceilings etc is 58" (1470 mm). Closet doors must be louvered or otherwise ventilated and have at least 60 square inches of open area for a washer only, or if the closet contains both a washer and dryer, doors must contain at least 120 square inches of open area equally distributed. 60 Sq. In (388 Sq. cm) Fig.12 Louvered door Washer & Dryer Caution! Do not install this appliance in a closet with a solid door. Mobile home installation Installation must conform to the STANDARD FOR MOBILE HOMES, ANSI A119.1 and NATIONAL MOBILE HOME CONSTRUCTION & SAFETY STANDARDS ACT OF 1974 (PL93-383). Grounding instructions This appliance must be grounded. In the event of malfunction or break down, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance is equipped with a cord that has an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. Specification subject to change without notice. Additional instructions Cleaning your washer Due to the water and energy efficient nature of your machine, regular cleaning of the inside of your washer is necessary and important. Please refer to page 37 for more information.