Frigidaire FFHB2740PE Use and Care Manual - Page 9
Degrees, Loosen or Remove, Screw, Bottom of Door - model
View all Frigidaire FFHB2740PE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
INSTALLATION To level the doors using the adjustable lower hinge (select models): 1 Remove all food items from door bins on door being adjusted. 2 Open doors to 90 degrees. 3 Loosen or remove screw. Loosen or Remove Screw To adjust the flipper mullion: 1 Loosen the screw located on the flipper mullion hinge. Flipper Mullion Open Door 90 Degrees Bottom of Door Loosen/Remove Screw (where applicable) NOTE Adjustable hinge should only be used after doors have been leveled with rollers. 4 Lift the door while adjusting the washer. To raise the door, rotate washer clockwise (when viewed from the bottom). To lower door, rotate washer counter-clockwise (when viewed from the bottom). Flipper Mullion Hinge Screw Adjusting Flipper Mullion Screw 2 Adjust flipper mullion height. For proper connection with the flipper mullion guide, there should be a separation about the thickness of a coin (0.060 inches, or 1.5 mm) between the guide and flipper mullion. Mullion Guide Flipper Mullion Lower Door Hinge Washer Raise Door Raising/Lowering Door Thickness of a Coin Adjusting Flipper Mullion Height 3 Re-tighten screw. 9