Fujitsu 5650C Operator's Guide - Page 118
The scanning does not start.
UPC - 097564306815
View all Fujitsu 5650C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
Introduction CONTENTS 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 6 TROUBLESHOOTING 6.1 Removing jammed documents 6.2 Indications of operator panel for errors 6.3 Items to check before contacting the dealer where you bought the scanner 6.4 Checking labels on the scanner 7 ONLINE SETUP 8 DOCUMENT SPECIFICATION OF ADF 9 OPTIONS 10 SCANNER SPECIFICATIONS Appendix Symptom : The scanning does not start. Back to the trouble shooting index Are the documents loaded correctly on the ADF paper chute? YES Load the documents correctly onto the ADF paper chute. NO Is the ADF closed completely? YES Is the interface cable connected correctly? YES Close the ADF completely. NO Connect the interface cable correctly. Reference : "Getting Started" 2.2 Connecting the scanner to NO your PC Is the connector of interface cable broken? YES Use a new interface cable and correctly connect it. NO (When using the scanner on SCSI interface) Is the SCSI ID set correctly? Turn OFF the scanner and set the SCSI ID correctly, then turn ON the scanner again. Reference : "Getting Started" 2.2 Connecting the scanner to NO your PC YES Does the scanning start after running ON the scanner again? YES The scanner operation is normal. NO If you cannot solve the problem after taking measures, check the items in "6.3 Items to check before contacting the dealer where you bought the scanner" and contact the dealer or an authorized FUJITSU service provider. All Rights Reserved, Copyright (C) PFU LIMITED 2004