Fujitsu 5650C Operator's Guide - Page 132

Introduction CONTENTS 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 6 TROUBLESHOOTING 7 ONLINE SETUP 7.1 Online setup 7.2 Double-feed detection 7.3 Setting of Page Edge Filler 7.4 Setting dropout color 7.5 Setting of pre-pick mode 7.6 Resetting the consumables counters 7.7 Adjusting the offset 7.8 Adjust the magnification 7.9 Power saving 8 DOCUMENT SPECIFICATION OF ADF 9 OPTIONS 10 SCANNER SPECIFICATIONS Appendix 7.1 Online setup (Continued from the previous page) The following shows the contents of the setup: No Function 3 Dropout Color 4 Pre pick 5 Consumable counter 6 Offset adjustment Description Use this function to drop out a color in Grayscale or Binary mode. Select "Yes" to enable Prepicking, otherwise select "No". Used to know when to replace the consumable items. After replacing the consumable, reset this counter. Set the horizontal and vertical offset for scanning. 7 Vertical magnification Adjustment Set the magnification of a scanned image. 8 Power saving Set the waiting time for the scanner to switch into the power save mode Settings Red/Green/Blue/White YES/NO To reset Main: -2 to 3 (can be changed by 0.5mm) Sub: -2 to 3 (can be changed by 0.5mm) -6.3% to 6.3% (can be changed by 0.1%) You can set the waiting time from 5 minutes to 55 minutes (can be changed by 5 minutes) Default Green YES Right & left : 0mm Top & bottom : 0mm 0% 15minutes 1 | 2 All Rights Reserved, Copyright (C) PFU LIMITED 2004