Fujitsu 5650C Operator's Guide - Page 147
Double feed detection conditions
UPC - 097564306815
View all Fujitsu 5650C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 147 highlights
Introduction CONTENTS 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 6 TROUBLESHOOTING 7 ONLINE SETUP 8 DOCUMENT SPECIFICATION OF ADF 8.1 Document size 8.2 Document quality 8.3 Maximum ADF capacity 8.4 Area not to be perforated 8.5 Double feed detection conditions 8.6 Background Color Areas 8.7 Job Separation Sheet 9 OPTIONS 10 SCANNER SPECIFICATIONS Appendix 8.5 Double feed detection conditions To obtain a correct monitoring and preventing miss detections of doublefeeds, the documents have to meet the following conditions. Check overlapping Paper weight : 41 g/m2 - 203 g/m2 (10.9 lb to 53.9 lb) Punched holes are not allowed within 35 mm (1.4 in.) of the vertical centerline of the document. Other paper shall not be glued within 35 mm (1.4 in.) of the vertical centerline of the document. Check length Document length deviation : 1 % or less Punched holes are not allowed within 35 mm (1.4 in.) of the vertical centerline of the document. Check overlapping and length Paper weight : 41 g/m2 - 203 g/m2 (10.9 lb to 53.9 lb) Document length deviation : 1 % or less Punched holes are not allowed within 35 mm (1.4 in.) of the vertical centerline of the document. Other paper shall not be glued within 35 mm (1.4 in.) of the vertical centerline of the document. ATTENTION When the overlapping check is specified, the papers which contact closely each other, such as glued paper or electro-statically charged paper, can result in the miss-detection of double-feed. All Rights Reserved, Copyright (C) PFU LIMITED 2004