Fujitsu FPCM22911 User Guide - Page 43

Starting Your LifeBook MH380 Mini-notebook Power On Power/Suspend/Resume Button The Power/Suspend/Resume button is used to turn on your mini-notebook from its off state. Once you have connected your AC adapter or charged the internal Lithium ion battery, you can power on your notebook. WHEN YOU TURN ON YOUR NOTEBOOK, BE SURE YOU HAVE A POWER SOURCE. THIS MEANS THAT AT LEAST ONE BATTERY IS INSTALLED AND CHARGED, OR THAT THE AC OR AUTO/AIRLINE ADAPTER IS CONNECTED AND HAS POWER. To turn on your notebook from its off state, press the Power/Suspend/Resume button, located above the keyboard to the right. When you are done working you can either leave your notebook in Suspend mode, See "Standby Mode" on page 47. or you can turn it off. See "Powering Off" on page 49.. DO NOT CARRY YOUR NOTEBOOK AROUND WITH THE POWER ON OR SUBJECT IT TO SHOCKS OR VIBRATION, AS YOU RISK DAMAGING YOUR NOTEBOOK. When you power on your mini-notebook, it will perform a Power On Self Test (POST) to check the internal parts and configuration for correct functionality. If a fault is found, your mini-notebook will emit an audio warning and/or an error message will be displayed. See "Power On Self Test Messages" on page 73. Depending on the nature of the problem, you may be able to continue by starting the operating system or by entering the BIOS setup utility and revising the settings. After satisfactory completion of the POST, your mini-notebook will load your operating system. 42 - Starting Your LifeBook MH380 Mini-notebook