Fujitsu MBA3073NC Product Manual - Page 42

Format capacity, Table 3.1, Logical Data Block Addressing

Get Fujitsu MBA3073NC - Enterprise 73.5 GB Hard Drive PDF manuals and user guides View all Fujitsu MBA3073NC manuals
Add to My Manuals
Save this manual to your list of manuals

Page 42 highlights

3.1.5 Format capacity The size of the usable area for storing user data on the HDD (format capacity) varies according to the logical data block or the size of the spare sector area. Table 3.1 lists examples of the format capacity when the typical logical data block length and the default spare area are used. The following is the general formula to calculate the format capacity. [Number of sectors of each zone] = [number of sectors per track × number of tracks per cell - number of alternate spare sectors per cell] × [number of cells in the zone] [Formatted capacity] = [total of sectors of all zones] ÷ [number of physical sectors in logical block] × [logical data block length] The following formula must be used when the number of logical data blocks is specified with the parameter in the MODE SELECT or MODE SELECT EXTENDED command. [Format capacity] = [logical data block length] × [number of logical data blocks] The logical data block length, the maximum logical block address, and the number of the logical data blocks can be read out by a READ CAPACITY, MODE SENSE, or MODE SENSE EXTENDED command after initializing the disk. Table 3.1 Format capacity Model Data block length User blocks Format capacity MBA3300NC, MBA3300NP 585,937,500 300 GB (*) MBA3147NC, MBA3147NP 512 287,277,984 147 GB (*) MBA3073NC, MBA3073NP 143,638,992 73.5 GB (*) (*) One gigabyte (GB) = one billion bytes; accessible capacity will be less and actual capacity depends on the operating environment and formatting. Note: Total number of spare sectors is calculated by adding the number of spare sectors in each primary cylinder and the number of sectors in the alternate cylinders. 3.2 Logical Data Block Addressing The HDD relates a logical data block address to each physical sector at formatting. Data on the disk is accessed in logical data block units. The initiator specifies the data to be accessed using the logical data block address of that data. 38 Downloaded from www.Manualslib.com manuals search engine C141-E270

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
3.1.5
Format capacity
The size of the usable area for storing user data on the HDD (format capacity) varies according to
the logical data block or the size of the spare sector area.
Table 3.1 lists examples of the format
capacity when the typical logical data block length and the default spare area are used.
The
following is the general formula to calculate the format capacity.
[Number of sectors of each zone] = [number of sectors per track
×
number of tracks per cell –
number of alternate spare sectors per cell]
×
[number of cells in the zone]
[Formatted capacity] = [total of sectors of all zones]
÷
[number of physical sectors in logical
block]
×
[logical data block length]
The following formula must be used when the number of logical data blocks is specified with the
parameter in the MODE SELECT or MODE SELECT EXTENDED command.
[Format capacity] = [logical data block length]
×
[number of logical data blocks]
The logical data block length, the maximum logical block address, and the number of the logical
data blocks can be read out by a READ CAPACITY, MODE SENSE, or MODE SENSE
EXTENDED command after initializing the disk.
Table 3.1
Format capacity
Model
Data block length
User blocks
Format capacity
MBA3300NC,
MBA3300NP
585,937,500
300 GB (*)
MBA3147NC,
MBA3147NP
287,277,984
147 GB (*)
512
MBA3073NC,
MBA3073NP
143,638,992
73.5 GB (*)
(*) One gigabyte (GB) = one billion bytes; accessible capacity will be less and
actual capacity depends on the operating environment and formatting.
Note:
Total number of spare sectors is calculated by adding the number of spare sectors in each
primary cylinder and the number of sectors in the alternate cylinders.
3.2
Logical Data Block Addressing
The HDD relates a logical data block address to each physical sector at formatting.
Data on the
disk is accessed in logical data block units.
The initiator specifies the data to be accessed using
the logical data block address of that data.
38
C141-E270
Downloaded from
www.Manualslib.com
manuals search engine