Fujitsu S300M Getting Started Guide - Page 20
When connecting with the Power cable, Use the power cable
UPC - 097564307355
View all Fujitsu S300M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
ATTENTION • When using the USB bus power cable, your computer must have two USB ports; one for power feeding, the other for USB cable connection. • When connecting with the USB bus power cable via a USB hub, use a powered hub equipped with an AC adapter. • When the ScanSnap is connected with the USB bus power cable, the scanning speed becomes slow. Double-sided color documents of A4 or letter in size can be scanned at a speed of: Power-cable-connected: Approx. 8 sheets/minute USB-bus-power-cable-connected: Approx. 4 sheets/minute (when used with a computer with Intel® Core™ Duo 1.83 GHz and with Scan mode set to Normal, Color mode Auto, and Compression rate 3, and others set to defaults) •When connecting with the Power cable: Use the power cable and USB cable . 1. Connect the Power cable. Remove the adhesive label covering the USB and power connectors. Connect to the ScanSnap's power connector and an outlet. 2. Connect the USB cable. Connect the USB cable to both the ScanSnap and your computer. USB connector Power connector Computer USB port 3. After power and USB ports are connected with cables, perform the procedure described in "Turning the ScanSnap ON" (page 21). 19