Garmin Cortex VHF and AIS Cortex Hub Installation Guide - Page 22

EN To program an MMSI with a handset 1. Turn Cortex Cortex Hub and handset ON. Switch the vessel's batteries ON to power the Cortex Hub 2. Connect the handset to the Cortex Hub via WiFi See Connecting to an Cortex Hub section 3. Select the handset Main Menu and program as follows; > Main Menu. ( ) Select the wrench icon ( ) to open the Configuration Menu. > Vessel > Vessel Identification > MMSI (Enter MMSI number) > Name (Enter the vessel's name) > Callsign (Enter the vessel's callsign) > Vessel Type (Select from the list) To program your vessel dimensions with a handset > Main Menu. ( ) Select the wrench icon ( Menu. > Vessel > Dimensions > Length (Enter length overall) > Beam (Enter beam overall) > GPS from stern (Enter measurement) > GPS from starboard (Enter measurement) ) to open the Configuration To confirm AIS operation LED indicator panel Green light indicates AIS data transmission Handset > Main Menu. ( ) Select the wrench icon ( ) to open the Configuration Menu. > Systems > AIS (View RX and TX data counter) Onboard App VHF > Main Menu ( ) to open the Settings Menu. > Device Settings > Systems... > AIS... (View RX and TX data counter) Onboard App (or handset Status Bar pictured) Transponder receive only mode (Stealth mode) is controlled (on/off) from within this menu. Transponder Status 22 To program an MMSI with a handset