Garmin Cortex VHF and AIS Cortex Hub Installation Guide - Page 25

EN Heading Sensor The Cortex Hub includes an internal heading sensor to display an accurately orientated AIS icon of your vessel on another vessels AIS system. The heading sensor also determines the direction to the bow for Anchor Watch. The heading sensor requires calibration that is performed from the Onboard App or a handset. The Cortex Onboard App 1. Turn Cortex Cortex Hub and device ON Switch the vessel's batteries ON to power the Cortex Hub 2. Connect the device to the Cortex Hub via WiFi See Connecting to an Cortex Hub section 3. Open the app and program as follows; > Select the Main Menu icon ( ) to open the Settings Menu. > Device Settings... > Sensors... > Heading... With a handset 1. Turn Cortex Cortex Hub and handset ON Switch the vessel's batteries ON to power the Cortex Hub 2. Connect the handset to the Cortex Hub via WiFi See Connecting to an Cortex Hub section 3. Select the handset Main Menu and program as follows; > Main Menu. ( ) Select the wrench icon ( ) to open the Configuration Menu. > Sensors > Heading To update Cortex Hub firmware Firmware updates for the Cortex Hub and H1/H1P handsets are bundled with Cortex Onboard App releases. Check the Apple IOS App Store or Google Play Store for updates to Cortex Onboard, select UPDATE as required. Once downloaded to your mobile device, connect it to the Cortex Hub WiFi on the vessel. The Cortex Hub will automatically recognize updated firmware.The Onboard App will ask if you would like to perform the firmware update. Select Yes to update. Heading Sensor 25