Garmin Cortex VHF and AIS Cortex Hub Installation Guide - Page 38

Dimensions LED icon troubleshooting

Page 38 highlights

EN Dimensions LED icon troubleshooting FUNCTION GPS GPS GPS COLOR Orange Green Red STATE Solid Solid Solid DESCRIPTION Acquiring a GPS fix. Flashes green momentarily when a fix is acquired; returns to solid after a few seconds. GPS Antenna short detected. It may also indicate a GPS system error, contact Vesper marine technical support if this state persists. FUNCTION VHF VHF VHF VHF VHF COLOR Orange Orange Green Red Red STATE Solid Flashing Solid Solid Flashing DESCRIPTION Initializing Before the Cortex Hub can transmit it requires 1 minute to initialize. MMSI not programmed A valid MMSI must be programmed before you may transmit your position. (see To program your MMSI number section) Stealth mode Stealth mode is on. Last position report not sent This may happen from time to time in very busy areas with lots of AIS traffic. This is normal behaviour for a Class B AIS device. UX VHF is transmitting. Normal AIS + VHF Operation. A VHF/DSC/AIS System Check has failed. Contact Vesper Marine technical support. Antenna short circuit or open circuit detected - may also indicate a high VSWR. 38 Dimensions LED icon troubleshooting

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42

EN
Dimensions LED icon troubleshooting
38
Dimensions LED icon troubleshooting
FUNCTION
COLOR
STATE
DESCRIPTION
GPS
Orange
Solid
Acquiring a GPS fix.
GPS
Green
Solid
Flashes green momentarily when a fix is acquired; returns to solid after a few seconds.
GPS
Red
Solid
GPS Antenna short detected. It may also indicate a GPS system error, contact Vesper marine technical
support if this state persists.
FUNCTION
COLOR
STATE
DESCRIPTION
VHF
Orange
Solid
Initializing
Before the Cortex Hub can transmit it requires 1 minute to initialize.
MMSI not programmed
A valid MMSI must be programmed before you may transmit your position. (see
To program your MMSI number
section)
Stealth mode
Stealth mode is on.
Last position report not sent
This may happen from time to time in very busy areas with lots of AIS traffic.
This is normal behaviour for a Class B AIS device.
VHF
Orange
Flashing
UX VHF is transmitting.
VHF
Green
Solid
Normal AIS + VHF Operation.
VHF
Red
Solid
A VHF/DSC/AIS System Check has failed. Contact Vesper Marine technical support.
VHF
Red
Flashing
Antenna short circuit or open circuit detected - may also indicate a high VSWR.