Garmin GDL 39 User's Guide - Page 33

Charging the Battery, mounting plate. - installation

Get Garmin GDL 39 PDF manuals and user guides View all Garmin GDL 39 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 33 highlights

2. The battery assembly is installed to the bottom of the GDL 39 following the location information inscribed on the battery assembly. 3. If a mounting plate is used, insert the GDL 39 and battery assembly into the mounting plate following the location information inscribed on the mounting plate. 3.5 Charging the Battery Charge the GDL 39 battery assembly until the LED on the battery turns off before using on battery power. Typical charge time is 4 hours. Charge the battery by connecting the appropriate power cable to the GDL 39 while it is attached to the battery assembly. The unit can be used while it is charging. Charge the unit within the following temperature range: 32° to 104°F (0° to 40°C). The battery should not be charged while on the glare shield due to the heat from the direct sunlight. The battery will not charge when the temperature is above 40°C. The battery assembly may be charged independently of the GDL 39. Connect power/data cable to connector in the battery assembly. An orange LED next to the power port on the battery assembly will be lighted while it is charging. The LED will extinguish when charging is complete. 190-11110-00 Rev. C Garmin GDL 39 Portable ADS-B and GPS Receiver User's Guide 3-15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
3-15
190-11110-00
Rev. C
Garmin GDL 39 Portable ADS-B and GPS Receiver User’s Guide
2.
The battery assembly is installed to the bottom of the GDL 39 following the
location information inscribed on the battery assembly.
3.
If a mounting plate is used, insert the GDL 39 and battery assembly into
the mounting plate following the location information inscribed on the
mounting plate.
3.5
Charging the Battery
Charge the GDL 39 battery assembly until the LED on the battery turns off
before using on battery power. Typical charge time is 4 hours. Charge the battery
by connecting the appropriate power cable to the GDL 39 while it is attached to
the battery assembly.
The unit can be used while it is charging. Charge the unit within the following
temperature range
: 32° to 104°F (0° to 40°C). The battery should not be charged
while on the glare shield due to the heat from the direct sunlight. The battery will
not charge when the temperature is above 40°C.
The battery assembly may be charged independently of the GDL 39. Connect
power/data cable to connector in the battery assembly. An orange LED next to the
power port on the battery assembly will be lighted while it is charging. The LED
will extinguish when charging is complete.