Garmin GDL 39 User's Guide - Page 39
Bluetooth Setup, Light, Behavior, Description
View all Garmin GDL 39 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Light Power Bluetooth Bluetooth Behavior Solid Green Solid Blue Blinking Blue Description Power is on Bluetooth connection is active Searching Table 4-1 GDL 39 Status LEDs The photosensor adjusts the status light intensity based on ambient lighting. 4.2 Bluetooth Setup 1. With the unit turned on, the Power button must be held down for more than five seconds to enter Bluetooth pairing mode. If the GDL 39 is powered on with a remote on/off switch, the GDL 39 will go into pairing mode automatically for two minutes. 2. The blue LED will blink when in this mode. 3. The blue LED will be constant when the device is connected. Bluetooth setup only needs to be run for the first time pairing with a device. You may need to select the GDL 39 from the list of Bluetooth devices in your display device. Multiple Bluetooth devices may be connected with the GDL 39. 190-11110-00 Rev. C Garmin GDL 39 Portable ADS-B and GPS Receiver User's Guide 4-3