Gateway 995 995 Series Server User Guide - Page 67
Replacing the fan cage board
View all Gateway 995 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Installing fan components 5 Lift the fan cage out of the server, then unplug the two cables from the fan cage. 6 Plug the cables into the new fan cage, then insert the new cage into the server. 7 Tighten the two captive screws on each end of the fan cage. 8 Reinstall the fan modules. 9 Reinstall the top rear panel. Replacing the fan cage board To replace the fan cage board: 1 Follow the instructions in "Preventing static electricity discharge" on page 36. Make sure that you turn off the server, then unplug the power cords and all other cables connected to the server. 2 Remove the fan cage from the server. For instructions, see "Replacing the fan cage" on page 59. www.gateway.com 61
61
Installing fan components
www.gateway.com
5
Lift the fan cage out of the server, then unplug the two cables from the
fan cage.
6
Plug the cables into the new fan cage, then insert the new cage into the
server.
7
Tighten the two captive screws on each end of the fan cage.
8
Reinstall the fan modules.
9
Reinstall the top rear panel.
Replacing the fan cage board
To replace the fan cage board:
1
Follow the instructions in
“Preventing static electricity discharge” on
page 36
. Make sure that you turn off the server, then unplug the power
cords and all other cables connected to the server.
2
Remove the fan cage from the server. For instructions, see
“Replacing the
fan cage” on page 59
.