Gateway 995 995 Series Server User Guide - Page 96
Press the board into place over the standoff, then reinstall the screw., Reconnect the three cables.
View all Gateway 995 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Chapter 4: Installing Components 5 Remove the screw that secures the front panel board to the server. Screw 6 Pull the board away from the server by prying on the side closest to the standoff. Standoff 7 Insert the new front panel board behind the board guide slot on the right edge of the front panel bay. Board guide slot 8 Press the board into place over the standoff, then reinstall the screw. 9 Reconnect the three cables. 10 Replace the panels. 90 www.gateway.com
90
Chapter 4: Installing Components
www.gateway.com
5
Remove the screw that secures the front panel board to the server.
6
Pull the board away from the server by prying on the side closest to the
standoff.
7
Insert the new front panel board behind the board guide slot on the right
edge of the front panel bay.
8
Press the board into place over the standoff, then reinstall the screw.
9
Reconnect the three cables.
10
Replace the panels.
Screw
Standoff
Board
guide
slot