GE CGS980SEMSS Use and Care Manual - Page 32

Operating Instructions Safety Instructions Care and cleaning of the range. Be sure electrical power is off and all surfaces are cool before cleaning any part of the range. WARNING: If your range is removed for cleaning, servicing or any reason, be sure the anti-tip device is re-engaged properly when the range is replaced. Failure to take this precaution could result in tipping of the range and cause injury. Front right burner Burner cap Burner head Electrode Burner base Sealed Burner Assemblies Turn all controls OFF before removing the burner parts. The round side burner caps and burner heads can be lifted off, making them easy to clean. The electrodes are not removable. The oval center burner head and cap assembly can be lifted off, making it easy to clean. The burner electrode is not removable. Make sure the hole in the burner head is positioned over the electrode and that the burner head is fully inserted inside the burner base. A small gap between the base and head is normal. Front left burner, back right burner and back left burner Burner cap Center griddle Burner head and cap assembly Electrode CAUTION: Do not operate the cooktop without all burner parts and grates in place. Electrode Burner head Front left, back right and back left burner Electrode Burner base Front right burner The electrode of the spark igniter is exposed when the burner head is removed. When one burner is turned to LITE, all the burners spark. Do not attempt to disassemble or clean around any burner while another burner is on. An electric shock may result, which could cause you to knock over hot cookware. Burner head Stability chamber Burner base Electrode Use a sewing needle or twist-tie to unclog the small hole in the burner head. Make sure the slot in the burner head is positioned over the electrode. Installation Instructions Consumer Support Troubleshooting Tips 32