GE DCVH485EKMS Use and Care Manual - Page 27
Replace Door Assembly, Replace Door Assembly Cont.
UPC - 084691191261
View all GE DCVH485EKMS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Installation Instructions 3 REPLACE DOOR ASSEMBLY Replace a door screw in the center of the side opposite the hinge. Then put the male end of the latch into place and fasten with two door screws. 3 REPLACE DOOR ASSEMBLY (CONT.) Move the mounting screw to the upper screw hole position on the hinge so that the door can be set on the cabinet during final installation. Replace all door screws that were removed. Fasten the hinge back on at the top and bottom with the hinge mounting screws. Remove the female end of the latch from the front panel of the dryer, rotate 180° and replace on the opposite side. 27
Installation Instructions
27
REPLACE DOOR ASSEMBLY
Replace a door screw in the center of the side
opposite the hinge. Then put the male end of the
latch into place and fasten with two door screws.
3
Fasten the hinge back on at the top and bottom
with the hinge mounting screws.
REPLACE DOOR ASSEMBLY (CONT.)
Move the mounting screw to the upper screw hole
position on the hinge so that the door can be set
on the cabinet during final installation.
3
Replace all door screws that were removed.
Remove the female end of the latch from the front
panel of the dryer, rotate 180° and replace on
the opposite side.