GE GTH21SCXSS Use and Care Manual - Page 14
Installation Instructions, PLUG IN THE ICEMAKER, INSTALL THE ICE BUCKET, INSTALL THE ICEMAKER FILL CUP
UPC - 084691176251
View all GE GTH21SCXSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Installation Instructions ICEMAKER INSTALLATION INSTRUCTIONS (CONT.) 5 INSTALL THE ICEMAKER FILL CUP Install the icemaker fill cup (side-mounted) into the icemaker as shown. Icemaker fill cup 6 PLUG IN THE ICEMAKER Holding the icemaker in place, insert the icemaker power cord plug into the socket on the back wall, making sure the prongs and holes are matched. Press the plug firmly into the socket. Lock the plug in place by clipping the restraints onto each side of the plug. Make sure the restraints click into place. 7 MOUNT THE ICEMAKER • Lift the icemaker so the fill tube extension fits in the fill cup opening. Hang the icemaker on the two screws. Make sure: • The power cord is still firmly in the socket. • The fill tube extension extends into the fill cup opening at the back of the icemaker. (Check the rear of the refrigerator to make sure the fill tube has not been pushed out of the back of the refrigerator). • The icemaker mounting screws are located in the uppermost position of the mounting slots. THEN SECURELY TIGHTEN THE ICEMAKER MOUNTING SCREWS. Fill tube extension Fill cup opening 8 INSTALL THE ICE BUCKET Place the ice bucket under the icemaker. Make sure the icemaker power switch is in the O (off) position. Ice bucket 9 REMOVE THE COVER Use a Phillips head screwdriver to remove the compressor compartment access cover. This requires removing six screws which attach the cover to the back of the refrigerator case. Be sure to save the screws as the access cover must be reinstalled later to ensure your refrigerator will function properly. 14