GE PW9000SFSS Use and Care Manual - Page 5

Using the warming drawer. GEAppliances.com The warming drawer will keep hot, cooked foods at serving temperature. Always start with hot food. Do not use to heat cold food other than proofing yeast dough, crisping crackers, chips or dry cereal. Control Knob The warming drawer controls are hidden with the drawer shut. Open the drawer. The controls are on the right side of the front frame. To use the warming drawer, press the ON/OFF switch to the ON position. Slide the moisture selector control to the open or closed setting. (See the Moisture Selector section.) Turn the control knob to the desired setting. PROOF 75-95°F LOW 140-160°F MED 160-195°F HIGH 195-230°F CMVlooesinsettd COVrpeisenpnt ON Signal Light The ON signal light is located below the ON/OFF switch and glows when the ON/OFF switch is in the ON position. It stays on until the ON/OFF switch is moved to the OFF position. The ON signal light is visible through the light viewer in the drawer front panel when the drawer is closed. This is a reminder that the heat is on. Moisture Selector The moisture selector is located on the inside front of the drawer. To keep foods moist, slide the moisture selector control away from the control knob. This closes the vent and seals the moisture inside the drawer. With the vent closed hot foods stay moist and soft. To keep foods crisp, slide the moisture selector control to the right towards the control knob. This opens the vents and allows the moisture to escape. With the vents open, it is normal for moisture to collect on surfaces above the warming drawer. In this setting condensation may occur around the inside edge of the drawer. 5