GE RVM1535MMSA Installation Instructions - Page 10
Determining Rear Mounting Screw Locations, at least one, wood screw, firmly in a stud
UPC - 084691156598
View all GE RVM1535MMSA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Installation Instructions D. DETERMINING REAR MOUNTING SCREW LOCATIONS CL CAUTION: Wear gloves to avoid cutting fingers on sharp edges. NOTE: The Rear Wall Template serves to position the bottom mounting plate and to locate the horizontal exhaust outlet. 1 Use a level to check that the template is positioned accurately. 2 Locate and mark at least one stud on the left or right side of the centerline. It is important to use at least one wood screw mounted firmly in a stud to support the weight of the microwave. Mark three additional, evenly spaced locations for the supplied toggle bolts. 3 Drill holes in the marked locations. If there is a stud, drill a 3⁄16″ hole for wood screws. For holes that don't line up with a stud, drill a 5⁄8″ hole for toggle bolts. NOTE: DO NOT MOUNT THE PLATE AT THIS TIME. 10