GE RVM1535MMSA Installation Instructions - Page 14
Adjust the Exhaust Adaptor, Connecting Ductwork, Install grease filter. See the Owner's Manual
UPC - 084691156598
View all GE RVM1535MMSA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Installation Instructions A4. MOUNT THE MICROWAVE OVEN (cont.) 3 Insert a self-aligning screw through top center cabinet hole. Temporarily secure the oven by turning the screw at least two full turns after the threads have engaged. (It will be completely tightened later.) Be sure to keep power cord tight. Be careful not to pinch the cord, especially when mounting flush to bottom of cabinet. Cabinet Front Cabinet Bottom Shelf Filler Block Equivalent to Depth of Cabinet Recess Self-Aligning Screw Microwave Oven Top 4 Insert 2 self-aligning screws through outer top cabinet holes. Turn two full turns on each screw. A5. ADJUST THE EXHAUST ADAPTOR Open the top cabinet and adjust the exhaust adaptor to connect to the house duct. Damper For Front-to-Back or Side-to-Side Adjustment, Slide the Exhaust Adaptor as Needed A6. CONNECTING DUCTWORK House Duct 5 Tighten center screw completely. 6 Tighten the outer two screws to the top of the microwave oven. (While tightening screws, hold the microwave oven in place against the wall and the top cabinet.) 1 Extend the house duct down to connect to the exhaust adaptor. 2 Seal exhaust duct joints using duct tape. 7 Install grease filter. See the Owner's Manual packed with the microwave. 14