Gigabyte GA-EX58-UD5 Manual - Page 45

2-3 MB Intelligent Tweaker(M.I.T.) CMOS Setup Utility-Copyright (C) 1984-2008 Award Software MB Intelligent Tweaker(M.I.T.) CPU Clock Ratio (Note 1) CPU Frequency  Advanced CPU Features QPI Link Speed QPI Link Speed  UnCore & QPI Features Base Clock(BCLK) Control x BCLK Frequency (Mhz)  Advanced Clock Control Performance Enhance Extreme Memory Profile (X.M.P.) (Note 2) System Memory Multiplier (SPD) Memory Frequency (Mhz) 1066 DRAM Timing Selectable Profile DDR Voltage Profile QPI Voltage >>>>> Channel A x CAS Latency Time x tRCD (SPD) 8 7 [22X] 2.93GHz(133x22) [Press Enter] [Auto] 4.8GHz [Press Enter] [Disabled] 133 [Press Enter] [Turbo] [Disabled] [Auto] 1066 [Auto] 1.5V 1.2V Auto Auto Item Help Menu Level Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults ESC: Exit F1: General Help F7: Optimized Defaults CMOS Setup Utility-Copyright (C) 1984-2008 Award Software MB Intelligent Tweaker(M.I.T.) x tRP 7 Auto x tRAS 20 Auto >>>>> Channel B x CAS Latency Time 8 Auto x tRCD 7 Auto x tRP 7 Auto x tRAS 20 Auto >>>>> Channel C x CAS Latency Time 8 Auto x tRCD 7 Auto x tRP 7 Auto x tRAS  Advanced DRAM Features 20 Auto [Press Enter] Voltage Types Normal Current Load-Line Calibration [Disabled] CPU Vcore 1.22500V [Auto] QPI/Vtt Voltage 1.200V [Auto] IOH Core 1.100V [Auto] DRAM Voltage  Advanced Voltage Control 1.500V [Auto] [Press Enter] Item Help Menu Level Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults ESC: Exit F1: General Help F7: Optimized Defaults Whether the system will work stably with the overclock/overvoltage settings you made is dependent on your overall system configurations. Incorrectly doing overclock/overvoltage may result in damage to CPU, chipset, or memory and reduce the useful life of these components. This page is for advanced users only and we recommend you not to alter the default settings to prevent system instability or other unexpected results. (Inadequately altering the settings may result in system's failure to boot. If this occurs, clear the CMOS values and reset the board to default values.) (Note 1) This item appears only if you install a CPU that supports this feature. (Note 2) This item appears only if you install a memory module that supports this feature. - 45 - BIOS Setup