Gigabyte GA-EX58-UD5 Manual - Page 50

System Memory Multiplier (SPD) Allows you to set the system memory multiplier. Auto sets memory multiplier according to memory SPD data. (Default: Auto) Memory Frequency (Mhz) The first memory frequency value is the normal operating frequency of the memory being used; the second is the memory frequency that is automatically adjusted according to the BCLK Frequency (Mhz) and System Memory Multiplier settings. DRAM Timing Selectable (SPD) Manual allows all DRAM Timing items below to be configurable. Options are: Auto (default), Manual. Profile DDR Voltage When using a non-XMP memory module or Extreme Memory Profile (X.M.P.) is set to Disabled, this item will display as 1.5V. When Extreme Memory Profile (X.M.P.) is set to Profile1, this item will display the value based on the SPD data on the XMP memory. Profile QPI Voltage The value displayed here is dependent on the CPU being used. >>>>> Channel A/B/C Timing Settings CMOS Setup Utility-Copyright (C) 1984-2008 Award Software Channel A Timing Settings >>>>> Channel A Standard Timing Control x CAS Latency Time 6 x tRCD 6 x tRP 6 x tRAS 16 >>>>> Channel A Advanced Timing Control x tRC 22 x tRRD 4 x tWTR 4 x tWR 8 x tRFC 48 x tRTP 3 x tFAW 13 x Command Rate (CMD) 1 >>>>> Channel A Misc Timing Control x Round Trip Latency 51 Auto Auto Auto Auto Auto Auto Auto Auto Auto Auto Auto Auto Auto Item Help Menu Level Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults >>>>> Channel A/B/C Standard Timing Control CAS Latency Time Options are: Auto (default), 6~16. tRCD Options are: Auto (default), 1~15. tRP Options are: Auto (default), 1~15. tRAS Options are: Auto (default), 1~63. GA-EX58-UD5P/UD5 Motherboard - 50 - ESC: Exit F1: General Help F7: Optimized Defaults