Gigabyte GA-P55A-UD7 Manual - Page 45
Extreme Memory Profile X.M.P., Profile DDR Voltage, Profile QPI Voltage
View all Gigabyte GA-P55A-UD7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Advanced Memory Settings CMOS Setup Utility-Copyright (C) 1984-2009 Award Software Advanced Memory Settings Extreme Memory Profile (X.M.P.) (Note) System Memory Multiplier (SPD) Memory Frequency (Mhz) 1333 Performance Enhance DRAM Timing Selectable (SPD) Profile DDR Voltage Profile QPI Voltage x Channel Interleaving 6 x Rank Interleaving 4 >>>>> Channel A } Channel A Timing Settings >>>>> Channel B } Channel B Timing Settings [Disabled] [Auto] 1333 [Turbo] [Auto] 1.5V 1.15V Auto Auto [Press Enter] [Press Enter] Item Help Menu Level Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults ESC: Exit F1: General Help F7: Optimized Defaults Extreme Memory Profile (X.M.P.) , (Note) System Memory Multiplier (SPD), Memory Frequency(Mhz) The settings under the three items above are synchronous to those under the same items on the MB Intelligent Tweaker(M.I.T.) main menu. Performance Enhance Allows the system to operate at three different performance levels. Standard Lets the system operate at its basic performance level. Turbo Lets the system operate at its good performance level. (Default) Extreme Lets the system operate at its best performance level. DRAM Timing Selectable (SPD) Quick and Expert allows the Channel Interleaving and Rank Interleaving items and the timing settings below to be configurable. Options are: Auto (default), Quick, Expert. Profile DDR Voltage When using a non-XMP memory module or Extreme Memory Profile (X.M.P.) is set to Disabled, this item will display as 1.5V. When Extreme Memory Profile (X.M.P.) is set to Profile1 or Profile2, this item will display the value based on the SPD data on the XMP memory. Profile QPI Voltage The value displayed here is dependent on the CPU being used. Channel Interleaving Options are: Auto (default), 1~6. Rank Interleaving Options are: Auto (default), 1~4. (Note) This item appears only if you install a memory module that supports this feature. - 45 - BIOS Setup