Gigabyte GA-P55A-UD7 Manual - Page 47

tRTP Options are: Auto (default), 1~15. tFAW Options are: Auto (default), 1~63. Command Rate(CMD) Options are: Auto (default), 1~3. >>>>> Channel A/B Misc Timing Control B2B CAS Delay Options are: Auto (default), 1~31. Round Trip Latency Options are: Auto (default), 1~255.  Advanced Voltage Settings CMOS Setup Utility-Copyright (C) 1984-2009 Award Software Advanced Voltage Settings ****** Mother Board Voltage Control ****** Voltage Types Normal Current >>> CPU Load-Line Calibration [Auto] CPU Vcore 1.11250V [Auto] x Dynamic Vcore +0.0000V Auto QPI/Vtt Voltage 1.150V [Auto] >>> MCH/ICH PCH Core 1.050V [Auto] CPU PLL 1.800V [Auto] >>> DRAM DRAM Voltage 1.500V [Auto] DRAM Termination 0.750V [Auto] Ch-A Data VRef. 0.750V [Auto] Ch-B Data VRef. 0.750V [Auto] Ch-A Address VRef. 0.750V [Auto] Ch-B Address VRef. 0.750V [Auto] Item Help Menu Level  Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults ESC: Exit F1: General Help F7: Optimized Defaults >>> CPU Load-Line Calibration Enables or disables Load-Line Calibration. This item allows you to adjust Vdroop at different levels. En- abling Load-Line Calibration may keep the CPU voltage more constant under light and heavy CPU load. (Default: Auto) Standard Disables Load-Line Calibration and sets VDroop following Intel specifications. Level 1 Enables Load-Line Calibration and slightly adjusts VDroop. Level 2 Enables Load-Line Calibration and moderately adjusts VDroop. Note: Enabling Load-Line Calibration may result in damage to your CPU or reduce the useful life of the CPU. CPU Vcore The default is Auto. Dynamic Vcore(DVID) This option is configurable only when CPU Vcore is set to Normal. The default is Auto. QPI/Vtt Voltage The default is Auto. - 47 - BIOS Setup