Gigabyte GA-X48-DS4 Manual - Page 53
Rank Write to READ Delay
UPC - 818313005625
View all Gigabyte GA-X48-DS4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Performance Enhance Allows the system to operate at three different performance levels. Standard Turbo Lets the system operate at its basic performance level. Lets the system operate at its good performance level. (Default) Extreme Lets the system operate at its best performance level. System Memory Multiplier Allows you to set the system memory multiplier. Options are dependent on CPU FSB. Auto sets memory multiplier according to memory SPD data. (Default: Auto) Memory Frequency (Mhz) The first memory frequency value is the normal operating frequency of the memory being used; the second is the memory frequency that is automatically adjusted according to the CPU Host Frequency (Mhz) and System Memory Multiplier settings. DRAM Timing Selectable (SPD) Manual allows all DRAM Timing items below to be configurable. Options are: Auto (default), Manual. ******** Standard Timing Control ******** CAS Latency Time Options are: Auto (default), 3~7. DRAM RAS# to CAS# Delay Options are: Auto (default), 1~15. DRAM RAS# Precharge Options are: Auto (default), 1~15. Precharge delay (tRAS) Options are: Auto (default), 1~63. ******** Advanced Timing Control ******** ACT to ACT Delay (tRRD) Options are: Auto (default), 1~15. Rank Write to READ Delay Options are: Auto (default), 1~31. Write To Precharge Delay Options are: Auto (default), 1~31. Refresh to ACT Delay Options are: Auto (default), 0~255. Read to Precharge Delay Options are: Auto (default), 1~15. Static tRead Value Options are: Auto (default), 1~31. Static tRead Phase Adjust Options are: Auto (default), 1~31. Command Rate(CMD) Options are: Auto (default), 1T, 2T. - 53 - BIOS Setup